3600 Series (Fire-Rated), 8500 Series (Life-Safety) - Metal Door Concealed Vertical Rod Exit Device

Model Type Rating Door Construction Max Size Single Doors Max Size Pairs & Double Egress
3600 CVR 3 Hr Hollow metal N/A 8'0" x 8'0"
3600T CVR-TRO 1-1/2 Hr Hollow metal N/A 8'0" x 8'0"

Features:
  • Patented top latching mechanism interlocks door to frame
  • Strong, durable construction for a high level of security
  • Adjustable steel rods protected in contoured covers
  • Easy to install
  • Clean, unobtrusive design
  • Pushbar clad or anodized, not plated, in a variety of finishes
  • Also available in top rod only version

Specifications:
3600 Series Certifications:
• UL Panic-Fire Exit Hardware, 3-Hour Fire Label
• California State Fire Marshall
• New York City MEA*
• Warnock/Hersey Listing

8500 Series Certifications:
• UL 305 Panic Hardware
• ANSI/BHMA A156.3 Grade 1
• California State Fire Marshall
• New York City MEA*

*Consult Factory for specific number

Materials: Pushbar made of extruded aluminum, clad or anodized in a variety of finishes.

Handing: Device is non-handed. Lever Entry Trim is field reversible.

Pushbar Length: Standard sizes: dimensioned for 30”, 36”, 42”, and 48” openings. Standard width bars can be field cut to the next smallest opening width.

Door Height: Standard unit adjustable for doors up to 66” above the selected bar height. For doors over 66” above bar height, up to 10 ft use 3655 Tall Door Kit.

Door Thickness: Suits 1-3/4” standard, up to 2-1/4”.

Stile Width: 3600 – Minimum 3-1/2”. Door construction may require additional stile width to meet fire ratings and provide adequate strength; 8500 – Minimum 3-1/2”.

Projection: 2-5/8” when fully projected, 1-5/8”when dogged.

Dogging: Standard dogging with hex key or optional cylinder dogging for 8500 Series only. Electric dogging also available for 3600 and 8500 Series.

Fasteners: Standard self-tapping screws. Optional Sex Bolt Kits 26-0584 (two required per device). Specify finish.

Cylinders (available separately): See CYLINDERS for cylinder make, thumbturn and trim ring information. (Available separately).

Cylinder x Fixed Pull: (Function 03): Accepts any standard mortise cylinder with MS® cam.

3080 Entry Trim (Functions 08, 09): Accepts any standard diameter mortise cylinder with MS® cam. Accommodates cylinder lengths from 1” to 1-1/4”. (Available separately).

Warranty: Five year limited.

Bolts and Strikes: The patented top latching mechanism utilizes a rotating top bolt which deadlatches around the header strike, interlocking the door to the frame. Supplied with standard header strike. The hexagonal, hardened steel bottom bolt is shielded in a cast housing for strength and stability.

Top Rod Only: The concealed vertical rod exit device is also available with a single vertical rod on top. Specify by adding “T” after exit device number.

Options and Accessories:
Silent Electrification Motorized Latch Retraction: The SE Motorized Latch Retraction option provides near-silent operation for quiet environments such as hospitals, offices, hotels, and libraries where solenoid-driven devices would be disruptive.

Electric Latch Retraction: The LR option uses a solenoid mounted in the pushbar for instantaneous unlocking and locking of the exit device from a remote location or access control device.  LR option is not available on rim type exit devices (see EL option).

Alarmed Exit Device: This battery-operated option emits a loud (95 decibel) alarm to notify management of unauthorized exit. Available on minimum opening width 36". Cannot be ordered with other exit device options.

Request to Exit (REX) – Monitor / Signal Switch: Mounted in the exit device pushbar on the hinge end, the switch can be used to activate signal light, horn, monitor, or other devices.

Cylinder Dogging: For management control of dogging exit devices for life-safety exit devices only.

Electric Dogging: A holding magnet keeps the pushbar depressed (set manually) and the latch retracted for lower profile exit devices, resulting in less damage and quieter operation.

Matching End Caps: Matching end caps are available for applications where it is preferable that the end caps match the finish of the exit device. Available for US finishes only.

Available Finishes: 313 Dark Bronze Anodized, 335 Black Anodized, 628 Clear Anodized, US3 Bright Brass, US4 Satin Brass, US32 Bright Stainless, US32D Satin Stainless.

For more information on any of the options and accessories listed above please see Options & Accessories for Exit Devices.

  

Related Products: When purchasing this product, please consider the following related products, available separately:

Accessories Cylinders Trim Power

REX-Monitor/Signal Kits available separately.

Optional Sex Bolt Kits 26-0584 (two per device) available separately.

3655 Tall Door Kit available separately.

Trim Function 03 (key retracts latch) requires 8650 Cylinder Escutcheon kit.

Adams Rite exit devices are operable by either rim or mortise cylinders depending upon the ANSI/BHMA functions of the exit device. Entry trim and fixed pulls available separately. Power supplies such as PS-SE,PS-LR, and 4612 Power Transfer Device available separately.

 

Related ANSI Trim Functions:

01 02 03 08 09 14
Exit only - no outside operation No outside operation - pull only when dogged Night latch - key retracts latch Key outside unlocks/locks lever Night latch - key unlocks trim, trim retracts latch/trim relocks when key is removed Passage only
Cylinder type - N/A Cylinder type - N/A Cylinder type - Mortise Cylinder type - Mortise Cylinder type - Mortise Cylinder type - N/A

Please see TRIM for information on Pulls and Entry Trim.