EX89 Pullman Rim Exit Device

The Adams Rite EX Series Exit Devices have reached their end of lifecycle and will be discontinued as of  March 31, 2022**. Warranty replacement, repair services and spare parts related to this product will be fulfilled in order of receipt until December 31, 2022 or until all remaining inventory is exhausted.

Customers can continue to order the 8000/3000 Series Exit Devices as equivalents replacements. Adams Rite reserves the right to replace discontinued product with an equivalent product as deemed by Adams Rite.

EX Series - To Be Discontinued 8000 Series Equivalent
EX80 (Dummy Bar)** 8099 (Dummy Bar)
EX76 (Concealed Vertical Rod) 8600 (Concealed Vertical Rod)
EX88 (RIM Starwheel) 8800 (RIM Starwheel)
EX89 (RIM Pullman) P8800 (RIM Pullman)

** Please NOTE that the EX80 has now been discontinued as of Feb 21, 2022.

The EX89 Pullman Rim Exit Device is designed for narrow stile aluminum applications that require a life-safety exit device. The EX89 features a ¾” Pullman latch bolt that is compatible with the Adams Rite 74R1 Electric Strike for narrow stile aluminum applications.


When the door closes, the Pullman latchbolt nests inside the strike assembly and the smaller deadlatch rests on the strike assembly activating the deadlatching feature. When the active pushbar is depressed, both the Pullman latchbolt and the smaller deadlatch are retracted, allowing the door to open. Exit device capable of opening under 20 lbs preload. Designed for use on single doors, or with mullion on pairs of doors. Suitable for low, medium and high traffic areas on aluminum, hollow metal and wood applications.


UL 305 Panic Hardware
ANSI/BHMA A156.3-2014 Grade 1


Materias: Active pushbar and back bar made of extruded aluminum. Matching metal angled end caps.

Handing: Device is non-handed.

Door Thickness:
• Suitable for use with all door thickness
• May be used with trim on 1-3/4" thick doors, up to 2-1/4" door thickness
• When cylinders are required, select rim cylinder length based upon door thickness.

Stile Width: Minimum 2" stile. Fits ultra-narrow, narrow, medium and wide stile aluminum doors.

Projection: 2-1/2" when fully projected,1-3/4" when dogged.

Dogging: Standard dogging with 3/16” hex key.

Fasteners: Device mounted using standard type ‘F’ self-tapping screws. Hardware is not visible from back when installed. Adhesive templates for mounting included.

End Caps: Mounting end cap with 1/4"overlap for cut coverage.

Universal Hardware Kit: Hardware kit suitable for aluminum, hollow metal, and wood door applications.

• Horizontally adjustable strike assembly body made of cast aluminum with hardened steel roller. Standard strike assembly suitable for centering doors in 4" jamb. Strike plate adjusts 1/4" horizontally.
• Optional wider strike assembly available to cover prep of existing Adams Rite 8800 Rim Exit Device strike plate, available separately.

Cylinders: Select standard 1-5/32" [29.4 mm] diameter rim cylinder such as the 8736 Rim Cylinder. Available separately. Cylinders with MS® cams can be readily obtained from most cylinder manufacturers. See CYLINDERS section for cylinder information.

Trim: Compatible with Adams Rite 3080 Series Entry Trim and 3090 Series Entry Trim. See TRIM section for cylinder information.

Noise Reduction:
• Impact bumpers to reduce noise from the initial device activation
• Return control to dampen the sound and control the device returning to its resting state
• Horizontal and vertical guides decrease the scraping sound of the active pushbar on the static back bar

Standard Package: Individually boxed.

Shipping weight: 10 lbs [4.54 kg]


• Pushbar and backbar available in choice of 313 Dark bronze anodized, 335 Black anodized, 628 Clear anodized. Metallic end caps finished to match exit device.
• Monitor: Dual signal switch (Options are field installable or factory installed)

For more detailed information on any of the options listed above please see the EX Series Options & Accessories page.


Device Length:

Exit Device Length Standard Door Opening Width Active Pushbar Length (as measured with end caps) Back Bar Length
Regular (R) 30" – 36" [762 mm – 914.4 mm] 24" [609.6 mm] 32-1/8" [816 mm]
Mid-length (M) 30" – 42" [762 mm – 1,066.8 mm] 24" [609.6 mm] 38-1/8" [968.4 mm]
Long (L) 42" – 48" [1,066.8 mm – 1,219.2 mm] 30" [762 mm] 44-1/8" [1120.8 mm]

*Device may be field cut to fit opening width between standard lengths by cutting the back bar and filler plate



Electric Strikes

74R1 Electric Strike

HES 9600 Electric Strike


Related Products: When purchasing this product, please consider the following related products, available separately:

Accessories Cylinder Electric Strikes Trim Power
EX-Mtg Cap Kit, EX-Push Bar Endcap Kit, EX-Filler Plate, EX-Monitor, EX-Backbar 628, EX-Pushbar 628, EX Hex Dog
EX89-Retrofit Strike Kit
Operable by either 4036 Mortise Cylinder or 8736 Rim Cylinder depending upon the ANSI/BHMA functions of the exit device. 74R1 Electric Strike 3080, 3080E Series Entry Trim, 3090-150, 3090P/3090C, A100 Series Keyless Entry PS-1 Power Supply, 4612 Power Transfer Device, 4605 Transformer, 4603 Rectifier

How To Order:

EX89 Pullman Rim Exit Device: Specify quantity and the following information. Order related products separately. 

Model Length Finishes Device Options
EX89 R 628 M
  R Regular (36") 313 Dark Bronze Anodized (blank) Standard, no options
M Mid-length (42") 335 Blank Anodized M Monitoring
L Long (48") 628 Clear Anodized

Adams Rite Exit Device Configurator

Whether you are familiar with Adams Rite exit device products or you are ordering for the first time, the Adams Rite Exit Device Configurator will help you get the part number you need quickly and easily by following a few simple steps:

  • Choose your exit device and select your product options
  • Configure your product to get your order string
  • Download or Email the cut sheet and provide to your vendor to order

Configure My Exit Device