eForce® - 3090P, 3090C Keyless Entry

Discontinuation Notice

Adams Rite eForce 3090P & 3090C have reached their end of lifecycle and have been discontinued as of  November 16, 2018. Warranty replacement, repair services and spare parts related to this product will be fulfilled in order of receipt until May 1st, 2019 or until all remaining inventory is exhausted.

Customers can continue to order eForce® 3090-150 and the A100-3090H (Aperio). Adams Rite reserves the right to replace discontinued product with an equivalent product as deemed by Adams Rite.

The eForce 3090P (Prox) and 3090C (iCLASS®) Keyless Entry Control for Adams Rite deadlocks, deadlatches and exit devices provides hardwired security with HID® Prox or iCLASS contactless card reader.


The eForce 3090P and 3090C Keyless Entry Controls are hardwired keyless entry trim for Adams Rite deadlocks, deadlatches and exit devices. Ideal for both exterior and interior aluminum and hollow metal door applications.
The eForce 3090P Keyless Entry Control uses HID® Prox contactless card reader for easy integration with existing credential systems. Direct Wiegand output allows for easy interface with any Wiegand-compatible access control system to accommodate flexible user access management.
The eForce 3090C Keyless Entry Control uses HID® iCLASS contactless card reader for easy integration with existing credential systems. Easily interfaces with access control systems to accommodate flexible user access management.


When an authorized card is presented, an audible beep and visual change in the red/green LED indicator confirms authorization. A high-speed motor engages an internal clutch to enable the exterior lever operation. When released, lever returns to horizontal. Clutching action prevents damage to internal components. Upon timeout, the lever operation is disabled until the next authorized card presentation or key override. The MS Deadlocks must always be relocked manually when used with the eForce 3090P, 3090C Keyless Entry Trim. Hardwired installation: 18-22 AWG recommended (seven conductor stranded and shielded). 500 ft maximum distance to host. 3090P, 3090CKeyless Entry accept any standard mortise cylinder with MS® cam, available separately.


FCC Compliant


• Surface mounted with concealed fasteners. Suitable for 1-3/4" to 2-1/4"[44.5 mm to 57.2 mm] door thickness.
• Interfaces with any Wiegand compatible access control
• Key override via mortise cylinder; 1" to 1-1/2" [25.4 mm to 38.1 mm] length with MS® cam (available separately)
• Audit trail limited by EAC

Monitoring: Request to Exit (sold separately); door position


Housing: Measures 1-3/4" [44.5 mm] wide x 15-3/8" [390.5 mm] high.

Handle: Clutch-protected cast zinc alloy, finished to match housing; field selectable handing.

Operating Temperatures: Full outdoor rating; Temperature range from -31 to +151F [-35 to +66C] and 5-95% humidity (non-condensing)

Standard Package: Individually boxed with mounting hardware for 1-3/4" [44.5 mm] to 2-1/4" [57.2 mm] door thickness.

Shipping weight: 5-1/2 lbs [2.49 kg]


3090C iCLASS:
• Integrated HID® 13.56 MHz iCLASS reader
• Supports credentials*:  iCLASS® (ISO 15693); CSN Read Only: MIFARE DESfire® EV1 and MIFARE Classic (ISO14443A), Sony Felica (ISO 14443C)
• 12 VDC/150 mA average, 300 mA peak

3090P Prox:
• Integrated HID® 125 KHz Prox contactless card reader
• Supports credentials*: HID Prox
• 12 VDC/150 mA average, 300 mA peak

*For information on migrating from one card technology to another or dual-technology card support, please contact 800-810-WIRE


• Cable Extension Kit 3090-CABLE with connectors allow for 12 ft wiring to run from installation site to hub, available separately.
• Available in choice of powder coat 121 to match 313 Dark bronze anodized, or US26D (626) Satin chrome.


Related Products – When purchasing this product, please consider the following related products, available separately:

Accessories Cylinders Power
3090-CABLE 12’ Cable Extension Kit  Standard 1" length, 1-5/32” diameter mortise cylinder with MS® cam such as 4036 Mortise Cylinder PS-1,  4612 Power Transfer Device 

Compatible Products – This product is compatible with the following products:

Deadlocks Deadlatches Exit Devices
MS1850S, MS1850S-050, MS1850SN, MS1850SN-050, MS1950, MS1950-050 Series Deadlocks

4510, 4530, 4900, 4920AN Series Deadlatches

8100, 8200 SVR, 8300, 8400 Mortise, 8500, 8600 CVR, 8900 SCVR8700, 8800 Rim, Exit Devices with 31/32” backset or greater.

Yale 7200 Series, Corbin Russwin ED4000 Series.Please check model number for availability.